Where to Set Length
Knowing how long each bit runs helps you build sets that fit your slot. In Bits you can set a bit’s length in three ways: auto timing (based on words per second), manual entry, or Time me (record yourself and save the duration).
- Open a bit and tap the gear (properties) icon.
- Tap Length (or “Sort by length” / the length row). You’ll see the length screen with auto timing, manual options, and Time me.
Auto Timing
- Turn Auto timing on. Bits will estimate the bit’s length using the word count and your words per second setting (set in More > Words per second). For example, at 4 words per second, a 40-word bit is about 10 seconds.
- This estimate updates when you change the bit’s content. Use it when you want a quick, consistent estimate without timing yourself every time. The same words-per-second value is used for all bits with auto timing on.
Manual Length
- With auto timing off, you can set the length by typing a duration (e.g. seconds or minutes) or using the controls on the length screen. Use this when you already know the length or prefer to enter it yourself.
Time me
- With auto timing off, tap the Time me button (often green). A timer starts. Perform the bit out loud (or in your head) at your normal pace. When you’re done, stop the timer. Bits saves that duration as the bit’s length.
- This gives you a length based on your real delivery, including pauses and pacing. Use it for bits you’ve already run through and want to time accurately.
Why Length Matters
- Set planning – See total set length by adding up bit lengths, so you can hit a 5-, 10-, or 15-minute slot.
- Sorting – In the Material tab you can sort bits by length (e.g. to find short tags or long stories).
- Pacing – Reviewing lengths helps you balance a set and avoid going over time.
For how the default pace is set, see “How to set your performance pace (words per second) in Bits.”